Learn How to Fabric Stamp

Stamp all images randomly following basic fabric stamping instructions.  Let stamped images dry to the touch & heat set by ironing.

Easy Spray Tie Dye with ZimPaint

Pinch a piece of fabric and tightly wrap a rubber band around it.  Bundle areas of the fabric that have stamped images on them.  Then make other rubber banded bundles randomly all over your fabric.  The pinched fabric will remain un-dyed, so a small amount of bundled fabric will yield a smaller undyed area.  A large fabric bundle will produce a larger un-dyed area. 

Spray a salmon or fuchsia ZimPaint solution over the entire piece of fabric.  Let the fabric drip dry for a while (it doesn't have to get completely dry at this point).  Remove the rubber bands.  Repeat the process, bundling different areas of fabric, and use purple spray ZimPaint.  Each successive dyeing reduces the amount of remaining white, un-dyed fabric.  When you're finished tie dyeing, let the fabric dry completely.  Then, iron the dried shirt.  When it's time to launder the garment, wash it with like colors.

Tie Dye ZimPaint Solution - In a  plastic spray bottle, mix approximately 1/4 jar of ZimPaint with about 4-6 ounces of warm water.  Shake or stir well. 

When the entire garment is dry, heat-set by ironing on the wrong side or with a pressing cloth.

You're done!